Thursday, January 27, 2011

DIY Nail polish remover container


I wanted to share with you how I made a Nail polish remover container
with a sponge. Mine was old and nasty. And I needed a new one.



Let's get to it!
 This is what you need: Sponge, container(s), something to cut with.


Make sure the sponge and container are deep enough.
If you use a bigger container you can doubble up the sponge.



My sponge had that white stuff on it so I had to cut that off. I
cut the sponge a bit bigger than my container. Then I just cut
off the corners. Make a cut in the middle for your finger.




Pour your Polish remover or Acetone in and get to it.


I replaced the sponge in my old container. And did a new one.
You can do one for dark, one for light and one for glitter polishes.


Don't throw away the pieces you cut off.


You can use them for sponging nail polish.
__ __ __

And that is a "Piece of Pie"

2 comments:

  1. Thank you... thank you... thank you.... So glad I found this! Can't wait to make this!

    ReplyDelete

Share your thoughts!

LinkWithIn

Related Posts Plugin for WordPress, Blogger...